Jose is not one to flaunt his work, but did send just one more picture you might enjoy. The guitar undergoing refinish was played by a teenager, most likely with a pick, ouch.
| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| A peek into the shop of Torres http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=5181 |
Page 1 of 1 |
| Author: | Bruce Dickey [ Sun Feb 19, 2006 10:38 am ] |
| Post subject: | |
Jose is not one to flaunt his work, but did send just one more picture you might enjoy. The guitar undergoing refinish was played by a teenager, most likely with a pick, ouch.
|
|
| Author: | Joe Beaver [ Sun Feb 19, 2006 10:42 am ] |
| Post subject: | |
If my shop was ever that clean I wouldn't be able to find a blessed thing..... (at least that is what I tell my wife) |
|
| Author: | RCoates [ Sun Feb 19, 2006 4:40 pm ] |
| Post subject: | |
Ok now I need to know what type of neck/body joint he's using. All his molds are closed and some appear to have the heal block installed with the bent sides. And the big question is this. If he's using a joint that is non traditional for his classical guitars, how have they been recieved by customers? Come on Bruce, get your buddy to come on board. |
|
| Author: | Serge Poirier [ Sun Feb 19, 2006 10:58 pm ] |
| Post subject: | |
Really neatos signor Jose! Cuando se comer aqui por favor? 
|
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|